Tenvik
Precision Honing Guide for Chisels and Planes
15° to 45°Bearing roller

Precision Honing Guide for Chisels and Planes

Lock the chisel or plane iron at your angle and roll it over the stone. The wide bearing roller stops rocking, so the bevel comes out flat and the edge comes out sharp.

$59.99 $119.99 -50%

16 customers with paid orders

ColorRed

30-day returnsSecure checkout

VisaMastercardAmerican ExpressApple PayGoogle PayPayPal
15–45°Lockable sharpening angle
2.8 inBlades 0.1 to 2.8 in wide
BearingsExtended roller, no rocking
EtchedLaser angle marks

Honed in three steps

  1. Set the angle

    Set your angle on the laser-etched guide, 15° to 45°.

  2. Clamp the blade

    Clamp the chisel or plane iron square in the guide.

  3. Roll and hone

    Roll it back and forth on the whetstone with light, even pressure.

Why the bevel stays flat

  • A locked angle means every stroke hits the stone the same way.
  • The extended roller with built-in bearings glides without rocking.
  • One guide holds blades from 2.5 mm to 71 mm wide.
  • Aluminum and stainless steel resist rust in a wet sharpening setup.
Honing guide holding a chisel on a whetstone

Specifications

Angle range15° to 45°
Blade width2.5–71 mm (0.1–2.8 in)
RollerExtended, with built-in bearings
MaterialAluminum alloy, stainless steel
Size14 × 5 × 6 cm (5.5 × 2.0 × 2.4 in)
ColorsRed, black
In the boxHoning guide (whetstone and blades not included)

Questions

Is a whetstone included?

No. Stones, chisels and plane irons in the photos are for demonstration.

Which blades fit?

Chisels and plane irons from 0.1 in to 2.8 in wide.

Does the color matter?

No. Red and black are the same guide.

What if it doesn't work for me?

Return it unused within 30 days. Contact us with your order number and we will walk you through it.

Pairs well with